Please note that you only need to register as a member for the first time.
7/16 DIN type rf connectors are a series of robust and waterproof connectors. They applied in radio devices and antennas at mobile communication base stations.
Since 7/16 connectors are often referred to as DIN in Japanese telecommunications construction sites, we have adopted the category name 7/16 DIN type rf connector.
We have an extensive lineup of connectors for copper corrugated cables for power feed lines, waterproof terminators and waterproof caps for empty ports, connectors adapt to 4.3/10 and N type.
Some 7/16 DIN type RF connectors are available for purchase from Digi-Key.
No cables with 7/16DIN connectors are available in stock.
7/16 DIN connectors are large and high-power connectors.
Its high-power and superior weather resistance is suitable for outdoor radios and mobile base station antenna devices.
Their body which is 30-40% larger than 4.3/10 connectors, apply to thick coaxial cables with high-power.
Trivia: Coaxial Cable Thickness
- The thicker the coaxial cable, the less flexible it is, but the better the characteristic impedance with less noise and loss. Usually, the longer the cable is, the worse the characteristic impedance become, so the tendency is to select thicker cables.
We have a lineup of products that can be used in high-frequency bands from DC to 6 GHz.
As a Power Feed Line
In mobile communication base station construction, copper corrugated cables (WFLEX, WF-H, etc.) are often used as feeder cables connecting antennas, multiplexers, radios, etc.If the equipment terminals are 7/16 DIN, a processed 7/16 DIN plug + corrugated cable will be used.Since we assemble coaxial connectors and cables at our company, we can also provide express services when you are in a hurry.
Trivia: Copper Corrugated Cable
- Copper corrugated cables are widely used in mobile band communication base station construction as coaxial cables with lower loss than ordinary coaxial cables (using a braided mesh outer conductor) by using ring-shaped corrugated copper tubes as the outer conductor.
Our connectors can be attached to copper corrugated cables manufactured by Fujikura Dia Cable.
For Free Ports on Equipment
In mobile communication base station construction, there may be unused empty ports for antennas, common equipment, radio equipment, etc.If the equipment has 7/16 DIN terminals, waterproof caps and terminators are used.In many cases, the caps are used for antennas, and the terminators are used for common-use equipment and radio equipment to close the unoccupied ports.In addition to our regular lineup, we have also developed a one-touch type that does not require screw mating for specific carrier installation. Please contact us for more information.
Conversion Connector for Equipment Replacement
When replacing equipment such as antennas, multiplexers, and radios in mobile communication base station construction, the type of equipment and cables (feeder lines, jumpers, etc.) may differ. If the terminals of the equipment or cables are 7/16 DIN, conversion connectors are used. Conversions for all patterns of plug (male) and jack (female) are available for "7/16 DIN - 4.3/10" and "7/16 DIN - N," respectively. In addition, 7/16 DIN jack (female) to jack (female) adapters are also useful when the length of the feeder wire is insufficient.
Note: The figures provided are typical values. For further details, please contact us.
|Coupling Method (Connection)
|Threaded Coupling M29 P1.5
|2.7kV max. at 50 Hz
|1.8 kW at 1 GHz
|Maximum Voltage Rating
|4 kV at 50 Hz
|10 GΩ min.
|Inner Conductor 0.4 mΩ max.; Outer Conductor 0.2 mΩ max.
|0 to 6 GHz
Talk to our Connector Experts
We can quickly provide you with the ideal coaxial connectors for your requirements. We welcome small lot orders. To get started, please send us details of your needs, and one of our experts will get back to you shortly.
・EST (Eastern Standard Time): 20:00–04:00
・PST (Pacific Standard Time): 17:00–01:00
・CET (Central European Time): 02:00–10:00