Total Customization Support
We offer total customization, including changes to the shape and length of the entire product or a part of it, as well as the material, surface treatment, and package. In addition, regardless of high-frequency coaxial connectors, we will manufacture products of various shapes, such as machined parts with surface treatment.
Why Custom RF Connectors?
Expand Your Product Portfolio
Our ability to offer small lot orders, rapid turn-around and full customization capabilities give you the flexibility to build multiple types of equipment and prototypes.
Develop & Manufacture High-Performance Devices
Rugged, compact connectors optimized for your operating environment enable you to manufacture higher value-added equipment.
Produce More Reliable & Lower-Cost Equipment
The longer service life of our coaxial connectors results in lower equipment manufacturing costs, which can be passed on to your customers, thereby giving you a competitive advantage.
Increased Productivity
Connectors tailored to your operating environment reduce product defects and shorten delivery times, thereby significantly increasing productivity.
Custom Coaxial RF Connector Solution Examples
Real world examples of how we solved our customers’ coaxial connector problems.
The Optimal Solution for Equipment Design
Problem
A communication equipment product design was implemented using standard connectors, but defects occurred due to dimensional tolerances. The connector manufacturer would not accept custom orders.
Solution
Based on hearings and suggestions, we have prepared custom coaxial connectors that are optimal for your equipment.This eliminated the need for redesigning the entire device, which would have been costly and time-consuming.
Accelerating Operations with Rapid Connector Delivery
Problem
The existing manufacturer's connector delivery schedule was slow, resulting in manufacturing and construction delays. Custom connectors would take up to six months to be delivered.
Solution
By switching connector suppliers to us, they were able to accelerate operations significantly. We could deliver optimal connectors in less than two weeks if requirements are met.
Expert Guidance for Optimal Coaxial Connector Selection in Equipment Redesign
Problem
A thorough review of its parts was required to redesign a piece of equipment to be more compact and efficient. However, the company had no knowledge of coaxial connectors and struggled to find one that was optimal.
Solution
Our engineers carefully studied the requirements and assisted in selecting an optimal coaxial connector based on the equipment's internal dimensions and frequency band, along with logistical constraints such as cost and schedule.
Streamlining Operations with Consolidated Connector Supply
Problem
Having to deal with multiple connector suppliers for a wide variety of products was creating great operational inefficiencies.
Solution
Consolidate your custom connector needs with us. We can help you with our catalog of approximately 1,000 products, strong custom order track record, dedication to the highest quality standards, and customer service excellence.
Custom Coaxial RF Connector Examples
SMA Receptacle Specialized Panel Shapes
Specialized Connectors for Audio
Gold-Plated Specialized N-Type Plugs
2,600 Mhz F-Relay Connectors
SMA Waterproof Connectors
F-Substrate Connectors
SMA Board Screw Fix Connectors
N Connectors for Mobile Infrastructure Equipment
Connectors for Antennas
Length-Specified SMA Right Angle Connectors
Connectors for Mobile Infrastructure Equipment for SMA
Connectors for BNC Measurement Equipment
Connectors for BNC 12D Right Angle
Floating Receptacles
N Specialized Panel Connectors
Key Features
Full Customization
Our seventy years of cutting technology development enable us to offer complete customization (except for mating parts).
Rapid Turn-Around
We have approximately 1,000 catalog items. This means we can save time by finding the one nearest to your requirements and adjust its shape, material, and surface treatment to be optimal.
Processed Cable Products
We offer fully processed coaxial cables with our connectors attached to save you time and minimize installation issues.
Small Lot Orders Welcome
We welcome small lot orders. Our catalog items can be purchased from lots as small as one piece. Custom orders are available for a minimum of 100 pieces.
Fast Worldwide Shipping
We ship worldwide. Catalog items are typically delivered in about one week. Custom items within 7–9 weeks.
Industry-Leading Quality
We offer the ultra-high quality expected from Japanese engineering with a product defect rate under 0.01%.
Unmatched Quality
- Our objective is to reduce the environmental impact of our products by carefully selecting materials in compliance with RoHS2. Our measuring tools and design equipment allow us to be flexible and innovative in product development.
- Superior Equipment
-
- Network analyzer Rohde & Schwarz R&S ZVA67 (frequency up to 67 GHz) Keysight Technology E5063A (frequency up to 14 GHz)
- 3D electromagnetic field analysis simulation and EDA software Keysight Technology EMPro
- 1 kHz mΩ meter
- Withstand voltage and insulation resistance tester
- Constant temperature and humidity tester
1 Khz Milliohm Meter
AC Automatic Insulation/Withstanding HiTester
Low Temperature & Humidity Chamber
Steady Supply Chain
Our production management spans 23 global sites, ensuring uninterrupted delivery and quality. Diverse manufacturing locations and partners enable us to adapt to challenges, maintaining a consistent supply of high-quality connectors, regardless of external conditions.
Typical Applications
Mobile Devices, Mobile Base Stations
Wireless Communication Equipment
Radio Frequency Product Measuring Instruments
Video Cameras for Television and Surveillance Cameras
Medical Equipment
Aerospace Communication Equipment
Waterproof IPX7 Equipment
Custom Order Delivery Process
STEP
01
Customers: Request a Custom Product
Please contact us with a custom order for a product not in our regular lineup. Please describe what you want to customize on the inquiry form, reference product, lot quantity, annual usage, etc.
STEP
02
To-Conne: Specification Confirmation
We will confirm the specifications based on your inquiry. One of our sales representatives may request to hold a remote meeting to discuss and confirm details. We will consult with you as appropriate, including whether or not a prototype is required.
STEP
03
To-Conne: Prepare and Submit a Quotation
We will provide an estimate based on the specifications we have confirmed. We may make drawings and perform simulation analysis on a case-by-case basis.
STEP
04
Customer: Prototype Order
You may prepare your order according to the quotation we have submitted. In the case of a custom order, the basic flow is to place a prototype order.
STEP
05
To-Conne: Prototype Production, Verification, Inspection, and Delivery
Prototypes are manufactured and verified according to the specifications agreed upon during the study. Although it is on a case-by-case basis, we often receive orders with a delivery time of 45 to 60 days after receiving the order.
STEP
06
Customer: Verification by Prototype
We will ask you to verify the prototyped connectors by connecting them to your products. If there are no issues, we can provide a quotation for mass production.
STEP
07
Customer: Mass Production Order
If satisfied with your tests and our quotation, you may place an order for mass production.
Talk to our Connector Experts
We can quickly provide you with the ideal coaxial connectors for your requirements. We welcome small lot orders. To get started, please send us details of your needs, and one of our experts will get back to you shortly.
Tel. +81-3-3939-9161
Office Hours
・EST (Eastern Standard Time): 20:00–04:00
・PST (Pacific Standard Time): 17:00–01:00
・CET (Central European Time): 02:00–10:00