What is a 1.85mm V connector
The 1.85mm V connector is one of the high performance miniature connectors for high frequency up to 67GHz. 2.4mm connector is compatible. 2.92mm K connector, 3.5mm connector, and SMA connector are not compatible. Impedance is 50Ω series, and screw coupling method ensures secure coupling.
Product List
Adapters
Right Angle Adapters
2.4mm
Between-series Adapters
High Frequency Test Cables
We offer a lineup of high-frequency measurement cables with 1.85mm V connectors, which can be combined with other connectors including SMA connectors. Please refer to the product page for specifications.
TC-054 60GHz compatible, High Flexibility, High Frequency RF Test Cable
This is a 0.085-inch (RG405) equivalent cable that is highly flexible and maintains stable characteristics up to the millimeter wave band. It can be used in a wide range of applications due to its wide variety of compatible connectors and relatively low cost.
Connectors can be selected from 1.85mm type(plug), 2.92mm type(plug, jack), SMA type(plug, L plug, jack), N type(plug), and others on request.
The 1.85mm V type cable core is pinned, allowing it to be utilized up to 60 GHz with very low reflection.
Please check the below pages for detailed cable specifications, electrical characteristics, etc.,
Custom-order Semi-rigid Cables
Semi-rigid cables with 1.85mm V connectors are available, and can be combined with other connectors including SMA connectors. Please refer to the product page for specifications.
0.085 inches SR-002 Semi-rigid RF Cables
0.085 inch equivalent semi-rigid rf cable. Boasting the largest number of compatible connectors in the lineup, you can consult us about support up to 50GHz.
Connectors are available in SMA type(Plug,Jack,Right Angle Plug,Flange Jack,Bulkhead Jack), 2.92mm K type(Plug,Jack), N type(Plug,Jack), 1.85mm V type(Plug), SMP type.
For detailed cable specifications, electrical characteristics, etc., please check the specifications on the product detail page.
1.85mm V Type RF Connector Features
High frequency
We have a lineup of products that can be used in the DC to 67 GHz high-frequency bandwidth. By changing the insulator from Teflon to air and increasing the outer diameter to 1.85 mm, these connectors can handle even higher frequencies than SMA connectors.
Compatibility
1.85mm V connectors are compatible with 2.4mm connectors; they are not compatible and cannot be mated with SMA connectors, 3.5mm connectors, or 2.92mm K connectors.
Tiny
The compact connector enables high-density mounting in a small space, not only for wiring in equipment, but also for connection between subassemblies that make up the equipment and between equipment.
1.85mm V Type RF Connector Applications
Satellite onboard, military equipment, aviation onboard equipment, network analyzers, etc.
1.85mm V Type RF Connector Standards & Dimensions
*The figures are typical values. Please contact us for details.
| Compatible Standards | IEC 61169-32 |
| Impedance | 50Ω |
| Conneciton | Threaded Coupling M7 P0.75-6H、6g |
| Voltage Rating | AC 160V |
| Maximum Voltage |
|
| Insulation Resistance | 5,000MΩ min. at DC 500V |
| Contact Resistance | 4.0mΩ max.(Center) / 2.5mΩ max.(Outer) |
| Frequency Range | DC to 67GHz |
1.85mm V Type RF Connector FAQ
Q
What is the difference to SMA connectors?
A
The 1.85mm V connector has a 1.85mm outline by changing the insulator from Teflon to air. This allows for an even higher waveguide mode cutoff frequency, achieving an operating frequency of DC to 67 GHz.
SMA connector, 3.5mm connector, and 2.92mm K connector are similar in shape but cannot be mated. 2.4mm connector can be mated.
Q
Are there connectors with even higher frequency and smaller size?
A
In our lineup, there are no products with even higher frequencies. There are 1.0 mm connectors on the market that support up to 110 GHz, so please consult with us.
A smaller connector in a lower frequency range is the SMP connector, which is available up to 40 GHz.
Talk to our Connector Experts
We can quickly provide you with the ideal coaxial connectors for your requirements. We welcome small lot orders. To get started, please send us details of your needs, and one of our experts will get back to you shortly.
Tel. +81-3-3939-9161
Office Hours
・EST (Eastern Standard Time): 20:00–04:00
・PST (Pacific Standard Time): 17:00–01:00
・CET (Central European Time): 02:00–10:00